centrifugal separators with a manual sludge discharge

centrifugal separators with manual sludge discharge

 with our semi manual centrifuge separator models NZ50, U15 and S15 from STA we cover a wide range of applications, see your self:

 

 

With its large effective rotor diameter, the high-performance 4 kW drive, and thanks to the special inlet hub the separator U-15 achieves a very good separation level of down to 3 µm.

The cleaned medium leaves the separator under pressure (5 m pumping head), the sludge is dry and can be removed without residual liquid.

Due to the direct drive system the separator is very compact, hence ideally suited for use in compact coolant systems or as a stand-alone solution directly placed at machine tanks.

Application: all kinds of industrial fluids, typically mechanical processing (coolant lubricant emulsions and oils, washing or vibratory grinding fluids), surface treatment or glass grinding.

The separator U-15 is also available in 3-phase version (simultaneous separation of a light secondary liquid phase, e.g. tramp oil).

 

technical details: U-15

flow rate: 1-120l/min (1-7.200 l/h)

maximum solid content in the medium: 2%

sludge retention per cycle 12kg

centrifugation number: 1.950 x g

achievable separating capacity:  > 3 µm

 

 

 

 

U-15

E&W Industrial Service Asia Co.,Ltd.

Thanks to the robust design (double jacket, direct drive, double mounting), this model is also suitable for use under extreme conditions.

The self-priming design principle, in which the fluid is drawn in directly through the lower open drum, provides decisive advantages:

- High separation capacity, as the fluid enters the
  centrifugal directly, avoiding swirling
- Low sludge residue moisture, as residual fluid flows
  downwards before draining
- Flexible use, thanks to low inlet height (16 mm) and
  return of cleaned fluid at approx. 0,5 bar pressure, mobile
  system

 

Thanks to special materials, use in aggressive media (90° C, pH 1-14).
Application: Fine cleaning of industrial fluids, usually with receiving volumes of up to 15 m³, for example coolant lubricant emulsions and oils, surface treatment baths, washing or vibratory grinding fluids, etc.

The separator S-15 is also available in 3-phase version (simultaneous separation of a light secondary liquid phase, e.g. tramp oil).

 

Technical details S-15:

Flow rate: 1-150l/min (1-9,000 l/h

maximum sludge retention: 12kg/ cycle

sludge retention: 12 kg/cycle

centrifugation number: 1.960 x g

achievable separating capacity: 1 µm

 

 

 

 

 

 

S-15

E&W Industrial Service Asia Co.,Ltd.

 

the centrifugal separator NZ50 is suitable for tasks involving low volume flows and solid quantities, the sludge nee to be drained manually.

 

The compact design allows easy integration in production systems, for example on machining centre's.

Thanks to special materials, use in aggressive media (90° C, pH 1-14) is also possible.

Application: Fine cleaning of coolant lubricant emulsions and oils, surface treatment baths, washing or vibratory grinding fluids, etc.

 

 

Technical details NZ-50:

Flowrate:1-50l/min

Maximum sludge content in medium: 2%

sludge retention per cycle: 6kg

Centrifugation number: 950 x g

Achievable separating capacity: 5µm

 

 

NZ-50

E&W Industrial Service Asia Co.,Ltd.